Energy Awareness Tips

Here are some good tips for anyone living in a house – whether you own a house, rent one or are building a new home. Doors are a huge source of energy loss or, if you follow the tips below, energy savings. Enjoy!

MAUMEE, OHIO – How many times have you heard someone call out, "close the door, you're letting the cold air in!" This common refrain has been heard in households for years. Now, during October's Energy Awareness Month, experts at Therma-Tru offer tips on how to keep the cold air outside while keeping energy bills low.

"Doors are a critical part of the housing envelope, so it's important to evaluate and maintain their energy efficiency throughout the year," says Derek Fielding, senior product manager for Therma-Tru Corp. "Along with your main entry door, you have side doors, sliding and hinged doors, garage doors and doors leading from the home to the garage. That's a large number of openings that need attention to maintain energy efficiency in the home."

According to Fielding, homeowners should always purchase an ENERGY STAR® rated door for their specific geographic area. In addition, there are several ways homeowners can assure their doors are helping support the overall energy efficiency of the home, including:

Tip #1 – If you're looking for door, be sure to select one made of fiberglass. A solid fiberglass door is up to four times more energy efficient than a solid wood door, plus you get the benefits that fiberglass has to offer, including resistance to rot, rust, dings and weather. Available in an assortment of styles, Therma-Tru_® Classic-Craft_® doors can come with woodgrain for staining or a smooth surface that can be painted to accent any home design.

Tip #2 – If you're replacing an entry door and want one with decorative or privacy glass in the door or sidelites, take time to research your options. Try to select doorlites and sidelites that have triple paned glass, which helps make the entire door more energy efficient. If only a two-paned glass is available, request a Low E coating on the glass that can enhance the energy efficiency of the unit.

Tip #3 – Reach out and touch your door on both hot and cold days. If you feel the exterior temperatures on the inside surface, then your door may not have adequate insulation and you should consider upgrading it with a replacement that is more energy efficient and has an ENERGY STAR qualified rating for your geographic area.

Tip #4 – Inspect the weather stripping around all sides of every door in the home to make sure it has not worn out. On a bright day, stand inside near your door and look for daylight flowing through the door perimeter. If light is coming in, then so most likely, is external air and possibly moisture. That means it's time to determine if your foam-filled weatherstripping may have lost some of its compression, cracked or has flatted out and needs to be replaced. An easy way to determine what weatherstripping you may need and order on line is to visit the door replacements parts section of the Therma-Tru website at http://www.thermatru.com/customer-support/replacement-parts/index.aspx.

Tip #5 – Open and close your doors --- on both dry and wet, humid days. If your door fits tightly on humid days, then it's most likely leaking air on dry days. You may want to consider a high-performance door made of fiberglass to prevent this type of swelling and add more energy efficiency to your home.

Purchasing a New Door

If your older entry door serves as a leaky energy drain on your home, then it's time to invest in a new high-performance entryway. Many homeowners in the past 25 years have embraced both the energy-efficiency and beauty of durable fiberglass doors.

According to the American Architectural Manufacturers Association (AAMA), fiberglass products are known for their reliability, customization aspects for style design, and energy efficiency. Fiberglass doors have an abundance of features outlined by AAMA at

http://www.aamanet.org/general/1/437/fiberglass-product-reliability-and-durability.

Constructed as a complete system of components, Therma-Tru fiberglass doors are designed and engineered to work together for lasting performance, security and energy efficiency. Multi-point locking systems that engage a series of locks at several places on the frame, impact-rated decorative glass options, plus the adjustable security strike plate that withstands up to three times the force of a standard strike plate, are key factors in creating Therma-Tru's dependable entry door system.

Homeowners looking for durability in their doors can also rely on the Tru-Defense® Door System. This system maximizes the seal between the door and the frame to help keep out the damaging effects of wind and rain, while increasing energy efficiency. Within this optional upgrade system, the weatherstripping, corner seal pad, door bottom sweep and profiled sill all work together to provide a door system that can withstand severe weather conditions along with day-to-day family activity.

Homeowners interested in researching fiberglass door design options for their own homes can use the free "Door Designer" program (located at www.thermatru.com/products/door-designer/) and the "My Saved Doors" tool (located at http://www.thermatru.com/MyThermaTru).

###

About Therma-Tru

Therma-Tru is the nation's leading manufacturer and most preferred brand of entryway doors. Founded in 1962, Therma-Tru pioneered the fiberglass entry door industry, and today offers a complete portfolio of entry and patio door system solutions, including decorative glass doorlites, sidelites and transoms, and door components. The company also offers low-maintenance Fypon urethane and PVC products. Headquartered in Maumee, Ohio, Therma-Tru is part of Fortune Brands Home & Security. (NYSE: FBHS). For more information, visit www.thermatru.com, www.fypon.com or call (800) 537-8827.

Images at: http://thermatru.com/news-events/media-resources/entry-door-images/

Planning a Sustainable Plantation for Wood Production

REPORT OFFERS SOLUTIONS TO EXPAND SUSTAINABLE TROPICAL WOOD PRODUCTION

FOREST PLANTATIONS ARE AMONG SOLUTIONS

WASHINGTON (Sept.4, 2012) – The Union of Concerned Scientists (UCS) today released a report, "Wood for Good: Solutions for Deforestation-Free Wood Products," analyzing tropical wood production's effect on deforestation and offering solutions for sustainable production. According to the report, governments and businesses must begin using sustainably established plantation forests to minimize the toll logging is taking on tropical forests.

Many of the products used every day by American businesses and consumers are made from tropical wood, including paper, furniture, building material and shipping supplies.

"The demand for tropical wood is growing globally, while more and more of the world's tropical forests are disappearing," said Pipa Elias, UCS consultant and the report's author. "It is 100 percent possible to harvest timber in the tropics profitably and sustainably. The main roadblock is a lack of political will. Businesses and consumers must demand responsibly manufactured products – giving governments and wood producers an incentive to expand sustainability efforts."

The report outlines a threefold solution. Firstly, wood producers and businesses should turn to responsible plantation forests to harvest wood. Plantation forests established on previously degraded lands should be used for wood production and sustainable forest management practices – such as protecting water and wildlife – should be followed. Plantations forests tend to grow faster than timber in natural forests and more of the wood can be harvested. Using already-cleared areas would help meet market demand for wood, while protecting primary forests. Secondly, the report also calls on governments to institute policies that make sustainable forest management practice attractive to businesses.

And finally, governments, businesses and consumers should demand products certified by programs such as the Forest Stewardship Council and the Programme for the Endorsement of Forest Certification. While these programs do not prohibit logging from old growth forests, they are the best option currently available for maintaining the profitability of the wood industry while protecting forests.

"Consumers certainly have an important role to play in safeguarding tropical forests," said Elias. "Small, everyday choices like recycling and reducing the demand for new wood absolutely help to protect tropical forests."

In addition to purchasing products that were made, packaged and transported using sustainably sourced wood, decreasing paper use at home helps reduce demand, Elias said. Consumers should buy in bulk to reduce packaging waste, swap paper towels for washcloths, pay bills electronically, and request to be removed from unwanted mailing lists.

Tropical forests are not only home to plants, animals and indigenous communities, but these habitats also purify air and water, and provide food and medicine for millions of people.

Cutting down natural forests also contributes to climate change. Tropical deforestation is responsible for about 15 percent of the world's heat-trapping emissions – more carbon pollution than the emissions from every car, truck, plane, ship and train on Earth.

"Tropical forests should be filled with the sound of howling monkeys and chirping birds, but when these resources are unmanaged, such sounds are replaced with buzzing chainsaws and falling trees," said Elias. "To reverse the damage caused by deforestation, governments and businesses must work together to integrate sustainability and profitability."

###

"Wood for Good" is the third installment in a UCS series of reports highlighting business, government, and consumer solutions for deforestation-free goods. The first report, "Recipes for Success," gave solutions for deforestation-free vegetable oils. The second report, "Grade A Choice?" examines solutions for deforestation-free meat.

The Union of Concerned Scientists is the leading U.S. science-based nonprofit organization working for a healthy environment and a safer world.  Founded in 1969, UCS is headquartered in Cambridge, Massachusetts, and also has offices in Berkeley, Chicago, and Washington, D.C. For more information, go to www.ucsusa.org.

New Solar Products Reduce Payback Time

 ecoSolargy Launches Top-Efficiency Solar Module Lines That Reduce Payback Time by Up to Five Years 

Nanotechnology engineered panels resist buildup and guarantee maximum performance 

IRVINE, Calif. – July 24, 2012 – ecoSolargy Inc., a full service solar solutions provider, announced today the release of its Lotus, Apollo and Zeus series, the company's new high-performance solar module lines. The new series have been designed to improve customer experience by maximizing efficiency and reducing investment payback time by up to five years. In addition to providing high-quality solar products, ecoSolargy develops strategic and installation solutions to fit the business needs of contractors, project developers and building owners.

"An increasing number of businesses have begun recognizing the environmental and cost-effective benefits of going solar," said Alan H. Lee, CEO at ecoSolargy. "ecoSolargy's objective is to facilitate the use of renewable energy through the provision of reliable and affordable solar solutions. The features in our new lines embody our commitment to sustainability, quality and cost-savings for our customers."

The new high-efficiency, black-on-black Lotus solar modules come in three different wattages to fit a variety of solar projects. The Lotus panels are engineered at the molecular level using state-of-the-art nanotechnology. Unlike regular solar modules, nanotechnology-built panels have a smooth surface that prevents water, dust and dirt accumulation, making them self-cleaning, anti-fading, anti-fogging and anti-bacterial. The modules' buildup resistance improves solar energy absorption by up to six percent and increases efficiency by 35 percent over a 20-year period. This feature also eliminates the need for periodical cleaning maintenance and ensures the panels are always performing at maximum efficiency, resulting in cost savings equivalent to a three to five year decrease in payback time.

The Lotus series also offer excellent performance under low light conditions and the black aluminum frames withstand the severest environmental conditions.

ecoSolargy's Apollo and Zeus mono-crystalline photovoltaic modules come in five different wattages that adapt to many budgets and project sizes. In addition to durability benefits –including corrosion and high wind loads resistance – both Apollo and Zeus panels rank high in performance. The Zeus 300W module has the second highest PTC[i] rating out of all 300w mono crystalline PV modules in the market; the Apollo 250W module, when combined with a M215 micro inverter, delivers one of the most efficient system performances in the market.

ecoSolargy is also revamping three of its existing module lines. The Alpha, Orion and Titan series have been improved for maximum efficiency and cost-savings. All the updated panels have more power, are more efficient and ensure quicker investment payback.

ecoSolargy's photovoltaic modules are highly efficient and reliable, and are designed to fit solar projects of all scales. Each panel undergoes meticulous quality inspection, which has earned them a 99.9 percent success rate. The company's racking and inverters are provided by industry leading partners that meet strict quality requirements.

All ecoSolargy solar panels now come with a ten-year workmanship warranty, as well as a 25-year performance guarantee, and can be financed through the company's financing program.

ecoSolargy has on-hand inventory and offers manufacturer-direct pricing on all its products, regardless of the order size. For ecoSolargy products specifications, please visit www.ecoSolargy.com.

About ecoSolargy
ecoSolargy is an American-owned full solar service solution headquartered in Irvine, CA. ecoSolargy's name combines the terms ecology, solar energy and technology and reflects the company's mission—to offer the latest in solar solutions to deliver affordable, clean and renewable energy to businesses and homes striving to achieve economic sustainability. The company has evolved from being a solar (PV) manufacturer to being a comprehensive solar solutions provider to meet the expanding needs of contractors, project developers and building owners.

For more information about ecoSolargy, please visit www.ecoSolargy.com. Follow on Facebook, facebook.com/ecoSolargy, and Twitter, twitter.com/ecoSolargy.                                                                                     

Community College Retrofits Lighting with LED Tube Lights

Seesmart Embarks on $2.3 Million Lighting Retrofit of Pasadena City College
Over 34,000 LED tube lights to be installed across campus of third-largest community college in U.S.

Simi Valley, CA, USA — 7 March, 2012 – LED lighting manufacturer Seesmart, Inc. has secured a $2.3 million contract with Pasadena City College for a lighting retrofit to further its reputation as a leader in sustainability.  The retrofit will replace more than 34,000 fluorescent tube lights in campus buildings with high-efficiency, long-lasting Seesmart LED tube lights.

Pasadena City College’s anticipated LED retrofit benefits include significant energy savings of $720,000 and 3.7 million kilowatt-hours per year, and its carbon footprint will reduce by 5 million pounds per year.  Additionally, the college expects an $850,000 rebate from Pasadena Water Power for this energy-saving project.

“Pasadena City College is a nationally and internationally recognized leader in sustainability,” remarked Richard van Pelt, CFO and assistant president of Pasadena City College.  “The move to replace all fluorescent lamps on campus with LEDs represents what we are about—global leadership in everything we do.  Not only will this save more than 55 percent of electrical consumption for lighting, but it saves in manufacturing resources and disposal costs and impacts.  We start saving money on the first day the LEDs are installed, so the payback is instantaneous.”

In the course of Pasadena City College’s lighting retrofit, classrooms, offices, stairwells, parking structures, gymnasium, and mechanical rooms of 26 buildings will be converted from fluorescent to LED lighting.  The contract for this massive project was issued using the California Multiple Award Schedules (CMAS). 

"Integrating Seesmart LED lighting products into Pasadena City College’s infrastructure will not only save energy, it will bring cost avoidance opportunities,” said Ray Sjolseth, President of Seesmart, Inc.  “The long lifespan of our LED products obviates the need for frequent replacement of individual lamps.  This minimizes maintenance costs and facility waste and means that on-staff labor will be available for other servicing needs.”

About Seesmart
Seesmart, Inc. is a division of Seesmart Holdings, Inc.  Seesmart, Inc. is a complete LED lighting solutions company with decades of experience in research and development, manufacturing and distribution.  Seesmart offers a broad product line to meet most commercial or residential needs and delivers a rapid ROI, high-quality products backed by up to a five-year warranty, immediate energy savings and true retrofit solutions.  For more information, please visit www.seesmartled.com.

This news release may contain certain forward-looking statements, expectations, intentions, strategies and beliefs regarding the future.  All statements contained herein are based upon information available to the management of Seesmart as of the date hereof, and actual results may vary based upon future events, both within and without the control of the management, including risks and uncertainties that could cause actual results to differ materially.
 
Management does not take any responsibility to update the contents of this News Release in case new aspects arise or new conditions change the facts available.

Greenblock Insulated Concrete Forms

Greenblock Insulated Concrete Forms: More Than Energy Efficient and Resistant to Forces of Nature

PORT ST. LUCIE, Fla. -- Habitat for Humanity is well-known for developing affordable housing, but its design and construction volunteers are also finding job sites fun as they learn how to build more sustainably with insulated concrete forms (ICF).

“One of the things I like with the product is our people enjoy their time on the job site,” said Habitat for Humanity of Seminole County’s Executive Director Penny Seater. “I just think there are so many plusses for our families and our volunteers,” she said.

The reduced weight of the forms during assembly means, there are less fingers smashed compared with other construction materials, and a lot fewer sore muscles, as well as less overall volunteer safety concerns for Habitat Seminole.

Greenblock Worldwide, LLC, of Port St. Lucie, Fla., was the manufacturer chosen for the Insulated Concrete Forms for two recently completed single-family, green and affordable homes for Habitat of Seminole County.

These homes are located in the Central Florida neighborhood of Altamonte Springs. John Riddle, Greenblock’s LEED Accredited Professional and Southeast Territory Manager, was present from pre-construction to final punch list, offering the project’s volunteers both technical and moral support.

The two homes were built side by side each with 1,556 sq. ft. of Greenblock ICF wall, one to the Florida Green Building Coalition’s (FGBC) green building rating system and one to the U.S. Green Building Council’s (USGBC) LEED rating system. The LEED Home is anticipated to achieve Gold certification. Greenblock 2-4-2/4 inch core product was installed. The designer was Baker Barrios Architects, Inc., and the structural engineer was JHR Consultants, Inc.

Riddle, who serves as chairman of the USGBC’s Central Florida Chapter, and his chapter’s volunteers donated many hours of sustainable design and construction consulting time to the project team.  The structures are Habitat Seminole’s first LEED and FGBC registered projects. Nearby Evergreen University provided many of the volunteer ICF installers on one of the homes while local Habitat Seminole volunteers rolled up their sleeves to build the other one.

Once the households were occupied during the summer of 2011, the new home owners reported more than a 75 percent drop in utility bills compared to their last residences, going from over $400 per month to less than $100 electricity bills.

“That’s a tremendous savings,” said Seater, adding: “In low income housing, lower utility bills can be the difference between food on the table or not.” Deeper savings can be achieved with lower insurance costs due to reduced property damage during natural disasters in an ICF home.

In Florida, termites and hurricanes are also concerns but with Greenblock walls those worries are gone as well, she noted. A Greenblock ICF wall has a solid concrete core providing a hurricane, tornado, and seismic resistant home.

Numerous savings were recognized with Greenblock ICF, including time of construction because it can be installed faster than concrete blocks or wood frame construction methods. The ease of fitting blocks together and factory produced pre-engineering means less construction site waste. Furthermore, furring strips are built-in from the inside and outside; the self-contained vapor barrier eliminates the need for a house wrap.

You can even downsize the HVAC system for additional savings up front and for the long-term as less cooling cycles are required by the unit and that lowers utilities cost while providing less ongoing worn parts to replace and an overall longer life span for the heating and cooling units.

Greenblock President Jimmy Myrick explained the speed and ease of building with Greenblock ICFs helps affordable housing project developers achieve very efficient design and construction schedules while reducing the need for job training.

“These recent projects provided Habitat’s volunteers with a fulfilling experience as they learned how to work with a new wall system with just a few hours of training,” Myrick said. He added, “This helps Habitat keep its volunteers working on schedule and until the home is completed, plus they often come back for the next project.”

It is a relative quick construction method, the team can put up the home in a very short time. When using volunteer time, this is a very important factor, since most have other jobs and are available for short periods of time; therefore getting the home finished quickly also helps retain volunteers.

In fact, Seater said the next home they build is scheduled for ground breaking in January 2012 and will utilize the Greenblock ICFs which weigh approximately 3 pounds. The future homes will be following the same design executed on the Altamonte Springs homes, including installation of Greenblock ICF walls, as Habitat Seminole strives to replicate the same sustainable building performance with volunteers from nearby religious institutions and many satisfied helpers returning.

As the green initiative continues to gain ground with homeowners it is projected that when these homes sell they will be in greater demand for their safety, savings and sustainability. Your home is your castle and the new homeowners plan on being there for a long time. Building with Greenblock means the home will outlast any other method of construction out there.

 

HVAC Motors Can Be More Efficient

RIVERSIDE, Calif. (www.ucr.edu) — Energy efficiency efforts tend to focus on things such as lighting and insulation. But, in fact, motors that run heating, ventilation and air conditioning (HVAC) systems are the largest user of energy in buildings.

At the same time, motor related efficiency requirements are relatively lax. There is no independent verification of motor efficiency, the equivalent of cutting out the Environmental Protection Agency and allowing car makers to say how many miles per gallon their vehicles get.

Sadrul Ula, who is research faculty at the University of California, Riverside's Bourns College of Engineering Center for Environmental Research and Technology (CE-CERT), is trying to change that. He recently received a $385,000 grant from the California Energy Commission to evaluate the efficiency of HVAC motors in building through testing on-site and in a soon-to-be built facility at CE-CERT.

"Everyone turns off lights or bathroom fans," said Ula, who is also managing director of the Winston Chung Global Energy Center at CE-CERT. "But, no one turns off motors. The awareness is not there."

In recent years, large-scale clean energy projects, such as solar and wind farms, have generated many headlines, pushing energy efficiency efforts to the side. But those relatively simple energy efficiency steps can have a large impact. A 2009 report by McKinsey & Company found the United States could reduce annual energy consumption by 23 percent by 2020 by deploying energy efficiency measures.

In California, nearly 47 percent of electrical energy consumption was used by commercial buildings. Motors that create that energy tend to operate at 5 to 10 percent below optimal efficiency, Ula said. Increasing that efficiency can have enormous implications.

To view full press release and downloadable illustration and photo visit: http://ucrtoday.ucr.edu/3078

Largest Solar PV Install in the World

New York skyscraper uses MAGE POWERTEC PLUS modules 50 stories above ground; 122.4 kW system also largest in Manhattan.

Dublin (Georgia), February 07, 2012. – MAGE SOLAR, part of the globally operating MAGE GROUP, announced that its MAGE POWERTEC PLUS modules are part of a 122.4 kW rooftop PV-installation in Manhattan. The solar array is at the elevation of 737 feet, making the building the tallest in the world with a solar PV-installation on its roof.

The installation on top of the 50-story commercial building in the heart of Manhattan was recently completed using highest-performance MAGE POWERTEC PLUS modules. With their industry-leading 30-year 80% power output guarantee, they are a highly visible, long-term commitment to corporate sustainability and additionally a sound financial investment and innovative business model as well. Since MAGE SOLAR modules exclusively feature positive tolerances (0 to +5 Watts) the system will produce with optimal efficiency for a maximum amount of time.

"MAGE SOLAR is proud to be part of this enormously exciting project," says Joe Thomas, President and CEO of MAGE SOLAR USA. "Whenever a company decides to add sustainability and innovative technology into their business plan, there are economic drivers behind it as well. With MAGE SOLAR's premium performance modules the owners are guaranteed maximum power efficiency and yield for the longest amount of time. But this innovative PV-installation also proves the great adaptability of solar PV systems, be it a homeowner's roof in the countryside, utility-scale trackers, or almost 1,000 feet above the ground in the middle of one of the most exciting cities in the world, solar works everywhere in America."

Photo Caption: The MAGE POWERTEC PLUS modules are part of this 122.4 kW rooftop array. At an elevation of 737 feet from the ground, this is the world's tallest building with a solar PV-array on top of it. © Vanguard Energy Partners

++++++++++
We would appreciate a sample copy of any reprints.

MAGE SOLAR – The Sun on Your Side
MAGE SOLAR USA, headquartered in Dublin, Georgia, specializes in complete solar systems and provides high-quality photovoltaic modules, intelligent mounting systems and high-performance brand inverters. As a subsidiary of the international MAGE GROUP, it uses the Group's 40 years of know-how to develop optimally coordinated system solutions. A competent partner network guarantees profitable solar energy systems for customers throughout the Americas and in fourteen more countries in Europe, Asia, Africa, and Australia.

www.magesolar.com
www.facebook.com/magesolar
www.twitter.com/mage_solar

LEED Certified Paint Plant Opens in Arizona

Dunn-Edwards Opens the World's First LEED-Certified* Paint Manufacturing Facility

PHOENIX, Ariz. – (June 1, 2011) Dunn-Edwards, the Southwest's leading manufacturer of premium paints, announces the opening of the world's first LEED-certified* paint manufacturing facility.  Located in Phoenix, the 336,000-sq.-ft. facility was custom designed to be the greenest and most efficient in the coatings industry.  This ultra-modern building encompasses manufacturing, product development, quality control laboratories, a distribution center, retail outlet and office space.  

"We have incorporated innovative, energy-efficient equipment and protocols, such as unique dust collection systems that capture and recycle particulates, and novel wastewater recycling techniques.  Our systems are classified as ultra-low discharge, meaning that waste generation is greatly minimized," said Karl Altergott, president.  

Dunn-Edwards is considered one of the most environmentally-friendly paint manufacturers and an industry leader in eco-efficient principles – all part of its Greener by Design philosophy. For example, throughout its operations the company focuses on initiatives such as energy efficiency, waste minimization, recycling, emissions reduction, and health and safety protection.   "So, not only are we manufacturing paint that is more eco-friendly, we have taken great steps to conserve energy and material resources, and to reduce waste in our physical environment," said Altergott.

Even small changes can add up to big eco-savings.  The company eliminated cardboard boxes for packaging one-gallon containers and now use heat shrink wrap.  Dunn-Edwards is the only paint plant in the United States using heat shrink wrap.  This amounts to a reduction of cardboard consumption by one million boxes, which equates to approximately 250 tons of cardboard per year.

Altergott reports that energy calculations on the new plant show a 50 percent reduction over its two existing operations; one was first built in the mid-1950s and the other in the mid-1970s.   "Our innovative automation at the new plant is one of the most comprehensive systems in the industry and light years beyond what we had at the older facilities," he explained.  "We are so much more efficient -- saving time, money and resources.  Increased automation has reduced the physical demands of workers, and thus potential injuries."

With more than 50 percent more space than our two former plants combined, this new plant meets Dunn-Edwards' needs for long-term growth and has room to expand another 40,000 sq. ft.  

"Dunn-Edwards is investing in its future in Phoenix by adding more than $40 million in capital investments and creating approximately 120 much-needed new jobs," said Mayor Phil Gordon.  "By working together on this project, the end result is a growing Phoenix economy with new jobs."

Barry Broome, president and CEO of the Greater Phoenix Economic Council, added, "Dunn-Edwards joins several new companies focused on green and sustainable solutions that have chosen Arizona because of its emerging reputation in this sector.  The City of Phoenix and the Arizona Commerce Authority provided strong leadership in supporting Dunn-Edwards' efforts to expand to Greater Phoenix, and we welcome them to our pro-business environment."

An official grand opening will be held Friday, June 3, 2011.  A ribbon cutting ceremony with local officials, including Phoenix Mayor Phil Gordon and Maricopa County Supervisor Mary Rose Wilcox, begins at 11 a.m., followed by plant tours and lunch. (NOTE: Event is for invited guests and media only.) The plant is located at 520 S. 67th Avenue, Phoenix, Arizona, 85043.  For more information about Dunn-Edwards, visit www.dunnedwards.com

*LEED certification pending; estimated late summer with a Gold Award


*****

NOTE: Photos and video are available


About Dunn-Edwards Paints
Dunn-Edwards has produced and sold premium paint products for 85 years throughout the Southwest.  Operating 109 stores in California, Arizona, Nevada, New Mexico and Texas, Dunn-Edwards is one of the nation's largest independent manufacturers and distributors of architectural paints and painting supplies.  Based in Southern California, the company is composed of approximately 1,500 employees.  dunnedwards.com

Media Contact:
Judy Lynes                        
310/752-4400 ext. 124
judy@thephelpsgroup.com  

This blog post was approved by www.iGreenBuild.com, a New Venture Communications web property.

Home Remodeling to Save Energy and Increase Value

Some good tips for home remodeling. Energy consumption in older homes can be dramatically improved with changes to heating and cooling systems, insulation, windows, doors, lighting and operating habits. At iGreenBuild.com we see an attractive market opportunity for the resale of homes that have been remodeled using eco-friendly products and sustainable concepts….even in poor market conditions for home sales.

Smart remodeling adds value to your home

Start planning for your summer remodel during Home Improvement Month

 

Des Plaines, Illinois, May 4, 2011—Spring is in the air, and homeowners are starting to plan their dream home remodeling projects. To commemorate May as National Home Improvement Month, the National Association of the Remodeling Industry (NARI) offers homeowners a few words of advice for getting the most value out of your remodeling investment.

 

More Americans are staying in their homes rather than moving. According to Fannie Mae’s National Housing Survey released in November 2010, 85 percent of the general population believed it was a bad time to sell their home. There’s a lot more to be gained through remodeling besides increased functionality, new appliances, efficient systems, updated décor, additional space or the pure enjoyment of making your home your own. There’s also the increased value your home receives when you make improvements.

 

With so many options available today, NARI offers a few considerations for homeowners who want to get the most out of their remodels.

• Curb appeal goes a long way. Exterior home improvements such as roofing, siding, windows and doors are subject to the elements and usually need to be replaced after a number of years. In terms of re-sale value, updated exteriors give sellers an edge over buyers who are attracted to your home before entering.  
• According to Energy Star, half of a home’s energy use is dedicated to heating and cooling. If a system is more than 10 years old, it may be time to replace it. New, energy-efficient systems are not only more cost-effective but are also better quality.  
• All homes benefit from increased insulation and sealing, regardless of climate. Older homes are traditionally under-insulated compared to new homes. And recent insulation innovations like spray foam or cellulose increase the ability to trap air inside. Proper insulation evens temperature flows, reduces energy use and has long-term benefits.
• Kitchen and bath renovations are still popular—and for good reason. Homeowners continue to see the value in updating areas of the home that are used frequently and are high functioning. Universal design concepts are commonly incorporated into kitchen and bath areas to accommodate people of all sizes and abilities and conveniences for long-term residents.  

 

Most homeowners can handle routine maintenance projects and cosmetic touch-ups, but it’s recommended they consult with qualified professionals for larger remodeling jobs and major changes to the home’s structure.

 

Homeowners that need to make several updates to their homes but cannot afford a complete overhaul may be interested in phased remodeling. In this instance, remodeling projects are broken into phases over time, for a long-term project plan. This also lessens the burden of remodeling to the homeowner as they remain in the home as work is being done.

 

As of April 22, 2010, the U.S. Environmental Protection Agency (EPA) passed new regulations for contractors working in homes built before 1978. The Lead Renovation, Repair and Painting rule mandates that remodelers who intend to work in pre-1978 homes to register their company and complete an 8-hour training and certification course with an accredited trainer. The course teaches remodelers how to safely contain lead in a home as it is being disturbed and reduce exposure to residents and workers. Homeowners should be aware that this new rule is enforced and should be skeptical of any contractors who choose not to follow the law. Visit www.nari.org to find a Certified Lead Renovator in your area.

 

NARI members represent a select group from the approximately 800,000 companies and individuals in the U.S. identifying themselves as professional remodelers.

 

NARI is a professional association whose members voluntarily subscribe to a strict code of ethics.  Consumers may wish to search www.nariremodelers.com to find a qualified professional who is a member of NARI. For the latest information on green remodeling, visit www.GreenRemodeling.org. Click here to see an online version of this press release.

 

# # #

About NARI: The National Association of the Remodeling Industry (NARI) is the only trade association dedicated solely to the remodeling industry.  The Association, which represents more 63,000 remodeling industry professionals — is “The Voice of the Remodeling Industry.”™ To locate a local NARI chapter or a remodeling professional, visit NARI’s Web site at www.NARIremodelers.com, or contact the national headquarters, based in Des Plaines, Illinois, at 800-611-NARI.

 

EDITOR'S NOTE: NARI can provide hi-res digital before and after photos of award-winning remodeling projects to accompany your story. Contact NARI with your photo request at marketing@nari.org or ask for Morgan Zenner at 800-611-6274.

 

If you do not want to receive e-mails from NARI please click here to unsubscribe.

 

 

 

Morgan Zenner

Marketing & Communications Coordinator

National Association of the Remodeling Industry

780 Lee St., Suite 200

Des Plaines, IL 60016

P: 847-298-9200

E: mzenner@nari.org

 

This blog post was approved by www.iGreenBuild.com, a New Venture Communications web property.

 

 

Green, Energy Efficient Affordable Custom Home in Florida

This is a very promising story that goes beyond the promotion of the insulated concrete walls. Giving people access to affordable, green homes that have the necessary components for saving energy and low cost, eco-friendly maintenance, is a smart direction for builders around the globe. Green material providers, banks, developers, builders and contractors need to find a way to create affordable housing and maintain profit for growth…..after all that's sustainability isn't it?

 News Release
Contact: Kathy Ziprik
828-890-8065
kziprik@aol.com

Builder Stands Apart in Florida Marketplace

              ORLANDO, FL. – When builder Dan Wigh was commissioned to build a custom home for a family in Palm Harbor, Fla. in late 2010 he knew exactly where to start --- from the ground up. Wigh, with Wytek Construction LLC, begins many of his projects with the Superior Walls® AG™ wall system to assure the quality, safety and energy efficiency of the homes his company constructs. 

            "Our fundamental belief is that families should be able to have an environmentally-sensitive, budget-friendly home at a fair price," says Wigh, president of Wytek Construction LLC in Valrico, Florida. "In many cases that home starts with the above grade application of a concrete AG wall system because they are innovative, watertight and extremely energy efficient. 

            "In 2007 we investigated 18 different types of wall systems and kept coming back to the AG wall system as the best overall solution for our regional needs in central Florida. Since that time we've used Superior Walls products in a dozen projects, and we anticipate another half dozen going up in 2011. We've been exceptionally pleased with the quality of the walls and the value they bring to our clients." 

            The insulated concrete AG Walls are produced at Superior Walls by Weaver Precast of Florida in a factory-controlled setting in Orlando. The walls are used in above-ground applications and are watertight, termite-resistant and help reduce noise infiltration into the home.

            "Wytek Construction has done what few builders in the state of Florida have been able to do --- they have replaced the old building practices of block and wood construction with energy-efficient concrete walls," says David Miller, Florida Sales Manager with Weaver Precast of Florida. "Their approach of building both the first and second floors with the highest quality products possible gives the homeowners what they need to ensure safety, durability, energy efficiency and peace-of-mind."

Saving Time and Dollars

            Miller points out that the time-saving aspects of having certified crews install the AG walls on site are also a benefit to both homeowners and builders. Since the system arrives factory-prepared for easy finishing, costly preparation for dry wall is eliminated along with the separate installation of insulation. Most AG wall systems are installed on the job site in just a day, so that construction of the home is immediate. 

           "Even during these challenging economic times for the housing industry, we're finding there are homebuyers who are eager to invest in well-crafted homes in Florida," says Wigh. "For us, that means we focus on finding the most energy-efficient and top-quality products available. Those searches have led us to the AG wall system, Simonton Windows® ProFinish® vinyl windows and doors, ZIP® System roof sheathing and wall sheathing from Huber®, Stonehenge Roofing Products stone-coated steel roofing and other products with outstanding reputations. 

            "It's important that we select products that support sustainable, energy-efficient, healthy home technologies that stand up to the Florida hurricane seasons with elegance. Our building practices and selected products are designed to be resource-efficient and more durable than traditional building processes. This helps us deliver value to homebuyers." 

            Wyteck Construction builds homes in the counties of Hillsborough, Pinellas, Pasco, Polk, Sarasota and Manatee in Florida. For more information on the company, visit www.wytekconstruction.com. Additional details on Weaver Precast of Florida, an authorized dealer of Superior Walls, can be found at www.weaverprecast.com/florida.  

This blog post was approved by www.iGreenBuild.com, a New Venture Communications web property.

Yes to Wood as a Green Building Material

This release is promising news for the green building materials business. I’d like to see the actual lifecycle analysis for wood products referenced below.

SCMA Backs New USDA Green Building Policy

PITTSBURGH, April 04, 2011 –The Southern Cypress Manufacturers Association (SCMA) today commended the U.S. Department of Agriculture’s (USDA) decision to promote wood as a green building material.
In making the announcement last week, U.S. Agriculture Secretary Tom Vilsack, said the USDA would preferentially select wood in the agency’s new construction projects, enhance green building material research and development, and demonstrate the use of wood in non-residential structures.
  
SCMA president Frank Vallot said, “Our industry has consistently spread the message that wood is the ultimate green building material because it’s renewable, sustainable, carbon-neutral, and can be locally sourced and repurposed at the end of a building’s life.


In addition, science-based research confirms that wood outperforms other building materials in lifecycle analysis, which examines the total environmental impact of building products through harvesting, transportation, manufacture, and end-of-life scenarios.  New studies show that wood products are among the most energy efficient to produce, and yield fewer air emissions than other building products.


The USDA’s efforts will not only encourage the use of American-grown wood and improve the health of America’s forests, but also will help retain and create jobs in our country.  We look forward to working with Secretary Vilsack and his agency to spread the positive environmental and economical messages associated with the increased use of wood products.”


The Southern Cypress Manufacturers Association is a non-profit organization dedicated to the promotion of sustainable cypress building products to trade professionals and consumers. For more information, visit www.cypressinfo.org.


This blog post was approved by www.iGreenBuild.com

Green Storm Water Detention Infrastructure

 

FOR IMMEDIATE RELEASE

 

Horizon Bay Congregate Living Facility Uses Oldcastle Precast, Inc. Green Storm Water Detention Infrastructure

 

March 2011 Tampa, FL –- Oldcastle Precast, Inc. had the unique opportunity to manufacture and install one of their cutting-edge precast products-- Storm Capture Module System, a subsurface storm water detention structure, specifically engineered and designed to accommodate both the storm water storage capacity demands and the load-bearing needs of the land use above them, at the new Horizon Bay Congregate Living Facility located in Tampa, Florida. The Horizon Bay project needed to be able to capture stormwater and pipe it to 6,572 CF of stormwater detention under the parking area to absorb and detain the storm water and allow water to slowly infiltrate into the ground assisting in recharging the groundwater.

 

Limited available site space necessitated the use of an underground storm water detention structure beneath the facility parking lot. Underground detention was the only practical choice according to design engineer Fuxan Engineering of Odessa, FL.  An overflow pipe led to storm sewers, but the majority of the storm water would be infiltrated back into the ground; a common Low-Impact-Development (LID) practice in Florida that serves to help recharge the aquifer. The Storm Capture Module System – a Green Infrastructure System - provided a much better value proposition to the Owner and Engineer in place of the plastic underground storage chambers originally proposed for the site.

 

The Storm Capture Module system is ideally suited for this type of underground detention application due to its stand-alone, traffic bearing design which does not rely on final paving and associated stone underlayment for structural capacity. 

The Storm Capture Detention Modules are constructed of high-strength structural concrete. Their ability to support traffic on the parking lot allowed for a 50% reduction in thickness of base rock required between the pavement and modules, as well as a 20% reduction under the modules, as compared to the originally planned plastic chambers.

The completed system design for Horizon Bay included 37 Storm Capture Modules.  Each module is constructed of precast reinforced concrete with interior dimensions of 6’x12’x2.5’ tall, with open bottom for infiltration. Four of the modules incorporated standard inlet grates to allow storm water direct entry from the parking lot into the system.  This eliminated the need for the four separate inlet structures originally designed into the project.  A precast splash pad was installed below each inlet grate to prevent scour of the bedding material. In addition, the inlet grates are used for direct access to the modules for inspection and cleaning as needed. Each module has large conveyance windows into adjacent modules to allow flow equalization, as well as access for maintenance. 

 

This was the first project where Ripa Construction used the Storm Capture Module system.  Ripa Construction’s project managers stated that the modules were a key component to providing access for a very limited site and did not require ongoing maintenance or cleanout during construction. The initial savings experienced from the reduction of aggregates in the foundation, backfill, and under the pavement are hard, tangible costs.  Ripa believes that coupling those savings with the experience they gained in the ease and speed of installation and lack of construction maintenance will make this system very useful in future projects.

 

About Oldcastle Precast, Inc.:

Oldcastle Precast, Inc is the leading manufacturer of precast and polymer concrete products in the U.S. Providing engineered product solutions nationwide to a number of market sectors including: Water - Transportation - Power & Energy -Communications  

Engineering Services - Construction Services - Government/Military. Oldcastle Precast is part of Oldcastle Building Products. For more information please visit www.oldcastleprecast.com.

 

Contact:             Brad Boulton

                            Oldcastle Precast   (239) 574-8896

Submitted by:    Oldcastle Precast, Inc.  National Sales, Marketing, and Engineering  phone: 888-965-3227          http://www.oldcastleprecast.com/

                            Barbara.bogo@oldcastleprecast.com

 

This blog post as approved by www.iGreenBuild.com.

 

Energy Efficient Digital Lighting - Easy to use or not?

How easy is it to truly adapt this energy efficient lighting system to a school’s existing building automation system? Can a school use this system with its portable/relocatable modular classrooms?

WattStopper Digital Lighting Management Snags 2011 BOM Top Product Award

SANTA CLARA, CA March 2011 – WattStopper is proud to announce it has received a 2011 Building Operating Management Top Product Award for its innovative Digital Lighting Management (DLM) product line.

An all-digital suite of plug-together lighting controls, DLM automatically configures to the most energy efficient sequence of operation based on installed components. The result is that DLM meets and exceeds energy code requirements, saves more energy than conventional controls, and provides an unprecedented return on investment for both new construction and retrofit projects.

With DLM, each room or space in a building has its own control network where the installer simply connects room controllers, occupancy sensors, switches and photocells as needed. Plug n’ Go technology then recognizes what is connected and automatically configures the space to the most energy efficient operation. For instance, advanced controls strategies such as automatic-on of 50% of lighting with manual-on of the remaining 50% automatically configure when appropriate DLM components are connected. Other DLM innovations include LCD screens on occupancy sensors for ease of setup, as well as a handheld bidirectional configuration tool that provides ladder-free system setup or adjustment. Because DLM uses Cat 5e RJ45 cables to connect components, time-consuming installation activities, such as interpreting wiring diagrams, setting DIP switches, and terminating low voltage wires, are eliminated. This speeds up installation and eliminates the potential for wiring errors.

DLM also offers integration of plug load control, allowing building owners to further leverage code-compliant occupancy sensors and realize greater savings. Most recently, the company expanded the DLM offering with components that allow quick and easy networking of room-based controls and lighting control panels for centralized monitoring, control and programming.

The Building Operating Management Top Products Awards are 100% reader-selected and recognize the most popular manufacturers and suppliers of the year, as determined by building and facility executives who participated in a national survey. Award winners are featured in the January 2011 issue.

WattStopper (www.wattstopper.com), a Legrand group brand, is a leading manufacturer of energy efficient lighting controls for commercial and residential use. We help customers find convenient ways to save energy, meet green initiatives, and comply with energy codes with our comprehensive range of products, programs, and services. Legrand (www.legrandelectric.com ), located in Limoges, France, is the world specialist in products and systems for electrical installations and information networks, offering solutions for use in residential, commercial and industrial buildings.

# # # #

BOM Product of the Year DLM Press Release

This blog post was approved by www.iGreenBuild.com

 

Clean Burn Furnaces - Company Saves $25,000

Barr Truck Group Saves $25,000 In Just One Winter With Clean Burn Furnaces

LANCASTER, PA  --  Barr Truck Group saved $25,000 on heating bills this past winter by converting the used motor oil collected at their two Maryland service facilities into free heat. More than 39,000 square feet of shop space spread between Salisbury and Delmar locations is heated with Clean Burn waste oil furnaces.

“We operate 37 service bays across our two locations and generate thousands of gallons of waste oil,” says Dave Barrett, Machine Shop Manager. “Having a system that recycles that oil while saving us money is a huge advantage to our business.”

As part of the dealer network for the Navistar, Freightliner, Carrier Transicold, and Isuzu brands, Barr Truck has access to tap a nationwide recommendation pool. When research on a new heating system began, the case for Clean Burn was clear. “Once we decided to use our waste oil for heat, we really started to do our homework on the best system,” explains Barrett. “Clean Burn was recommended across the board by the other truck dealers we talked to.”

The conversion from fuel oil heat was made at their Salisbury location in 2008 with the installation of three CB-5000 units. The Delmar location converted from propane heat with a CB-5000 installed in 2008 and a CB-3500 installed in 2009.

The furnaces were installed and are now serviced by Eco Heating Systems, the Authorized Distributor for Clean Burn products in Maryland and Southern Delaware. “They’re a great group to work with,” Barrett says of the relationship with Eco Heating Systems. “The service and support we get from having a local distributor like that is really what sets Clean Burn apart.”

Barr Truck Group recycled more than 8,000 gallons of waste oil in their Clean Burn furnaces last winter alone.

“We know we can count on our Clean Burns,” says Barrett. “The reliability and available support from our distributor allows us to focus on running our business and not worrying about our furnaces.”

For more information on Barr Truck Group visit www.barrtruck.com. For additional details on waste oil heating products available in Maryland and Southern Delaware, visit www.ecowasteoilheaters.com.

There are over 80,000 Clean Burn functional furnaces and boilers located throughout the world that burn millions of gallons of waste oil each year on-site, at the point of generation. This volume of waste oil would otherwise be transported on highway systems and pose a considerable risk to spills and/or contamination to the environment.
 

Clean Burn is an ENERGY STAR® partner. The company holds numerous industry certifications and works with the U.S. government, the Environmental Protection Agency and various associations to help coordinate the establishment of standards and regulations related to heat recovery and recycling efforts involving used motor oils. For more information on Clean Burn, visit www.cleanburn.com or call 1-800-331-0183.

##

PHOTOGRAPHY: For images of Clean Burn products visit the MEDIA ROOM at www.cleanburn.com.  

 

This blog post was approved by www.iGreenBuild.com.

 

LED Lighting Awards

EvoLucia's Aimed LED Lighting Honored with Next Generation Luminaires Lighting Design Award for Street/Area Lighting

[SARASOTA, FL: March 21, 2011] The U.S. Department of Energy, along with its partners the International Association of Lighting Designers (IALD) and the Illuminating Engineering Society(IES), has announced the winners of the 2010 Next Generation Luminaires™ Solid State Lighting Design Competition including EvoLucia's Aimed LED Lighting among the 37 profiled winners. EvoLucia is a wholly-owned subsidiary of Sunovia Energy Technologies, Inc.

The competition drew 368 total entries, though only 138 entries from 61 companies qualified for adjudication. All four of those chosen as "Best in Class" were selected from the indoor lighting market.

After thoroughly evaluating five of EvoLucia's Cobrahead (SCHX5 LED)units, looking for those products with the lowest glare, highest efficiency, best thermal management, highest uniformity and most efficient optics, the judges applauded the glare control, uniformity and efficacy of the SCHX5 LED. EvoLucia's SCHX5 LED was one of the remaining 33 entries that were selected to be a product that the judging panel would recommend to lighting specifiers. There was only one other honoree in the roadway light category selected from all the entries. EvoLucia's SCHX5 LED was the only outdoor roadway/parking luminaire in this category that was recognized with an award.

The EvoLucia product profiled by the judges was the Cobrahead or SCHX5 LED street/area light which employs EvoLucia's patent pending Aimed Optics™ technology to efficiently direct light to a targeted area. The SCHX5 performs with an industry-high Fitted Target Efficacy score of 57 to put the most foot-candles on the ground, in the pattern required, with the best uniformity, using the fewest LEDs and the least power consumed.

Bob Fugerer, Chief Technology Officer of Sunovia, stated "The entire team at EvoLucia applauds the DOE, IALD and IES for advancing the awareness and market-acceptance of innovative LED lighting technologies that are worthy of specification by lighting designers. There is no question that LEDs are setting new standards for general illumination lighting. We are delighted that the distinguished judging panel has recognized the pace-setting efficiencies in energy and light utilization that our Aimed Optics™ technology has made possible in nextgeneration LED roadway and parking area luminaire design."

EvoLucia Aimed LED Lighting is not only more energy-efficient and environmentally friendly than many other light sources, it is also much more effective. Through EvoLucia's patent pending Aimed Optics™ technology, less overall light is needed if the light is correctly focused on the target area, which allows for more efficient lighting solutions.

Links: www.evolucialighting.comwww.sunoviaenergy.com

Sunovia Energy Technologieswas founded in 2007 to provide energy-efficient and sustainable energy solutions by commercializing advances in clean technology. The subsidiary EvoLucia Lighting, Inc. markets LED Lighting for roadways, public spaces and other outdoor site applications, using patent-pending Aimed Optics™ technology providing more energy-efficient, environmentally friendly, and effective aimed lighting than other light sources.
　
Simply put, "aimed LED lighting" is the method of providing exactly the light that's needed, where it's needed. EvoLucia optimizes utilization of LEDs to put the most foot-candles on the ground, in the pattern required, with the best uniformity, using the fewest LEDs and the least power consumed.
It is this capability of "Aimed Optics" that ideally enables EvoLucia's luminaires to meet and exceed the Dept. of Energy's Fitted Target Efficacy (FTE) Energy Star criteria for solid-state lighting (SSL) luminaires.
　
EvoLucia: Aimed Light. Better Light. Energy Lite.

This blog post was approved by www.iGreenBuild.com

Lead Paint Hazards and Older Windows - Poison Prevention Week

- March 20-26 National Poison Prevention Week -

          PARKERSBURG, W. VA. - If your home was built before 1978 and you still have the original windows, it’s time to seriously consider replacing your windows --- especially if you have young children or a pregnant person living at home. During National Poison Prevention Week  --- March 20-26, 2011 --- homeowners are urged to evaluate their windows and make healthy living changes. 

          According to the Environmental Protection Agency (EPA), the routine opening and closing of windows in homes built prior to 1978 can disturb lead-based paint around the windows, causing paint dust and chips to be released into the air. These lead particles are so potentially dangerous that the EPA now requires contractors to be trained and certified before they can perform any renovation, repair or painting projects that may have previously applied lead-based paint. 

          “Research indicates that the everyday activity of opening and closing windows creates friction that then allows invisible lead dust to enter the air,” says Rick Nevin, a consultant to the National Center for Healthy Housing (NCHH). “Young children, who crawl on the floor where the lead dust has settled, can be especially at risk. Toddlers put their hands in their mouths … and after playing on the floor near a window, they can easily transfer the lead dust into their mouths. The ingested lead travels through the bloodstream to a child’s developing brain, causing many types of neurobehavioral damage.” 

          According to Nevin, one of the most important long-term investments a homeowner can make for the overall safety of a family is to replace older windows, using the EPA-approved lead safe renovation guidelines. “Replacing older windows is one of the best ways to reduce lead risks,” says Nevin. “Make sure to use only a contractor that is certified in lead-safe work practices and strongly consider the use of ENERGY STAR® qualified windows, like the vinyl replacement windows offered by Simonton Windows®. These windows are a healthy choice for replacing older single-pane units. They’re energy-efficient and a good value for the investment.”

         “At Simonton, we advocate that replacing older windows coated with lead-based paint with vinyl windows is a sensible step for homeowners who want to create a healthier home environment,” says Gary Pember with Simonton Windows. “We believe Rick’s research substantiates the replacement of all windows coated with lead based paint as a way to dramatically help reduce lead dust within that home.”

          Nevin explains that, according to his research funded by the National Institute of Health (NIH), homeowners need to understand there are four key steps to completing a “lead-safe window replacement strategy” for the home. “First, they advise replacing all single-pane windows with ENERGY STAR qualified windows,” says Nevin. “Second, stabilize any significantly deteriorated paint. Third, perform specialized cleaning to remove any lead-contaminated dust. And finally, perform dust wipe tests to confirm the absence of lead dust hazards after the clean up.” Research results can be obtained at www.ricknevin.com/windows.

         Celebrating its 65^th year of quality manufacturing operations in 2011, Simonton Windows produces ENERGY STAR® qualified replacement and new construction windows and doors, including a line of impact-resistant products. Simonton ranked “Highest in Builder and Remodeler Satisfaction among Residential Window and Patio Door Manufacturers” in the J.D. Power and Associates 2010, 2009, 2008 Builder and Remodeler Residential Window and Patio Door Satisfaction Study^SM.  The company also ranked “Highest in Customer Satisfaction among Residential Window and Patio Door Manufacturers” in the J.D. Power and Associates 2010 Windows and Patio Doors Satisfaction Study^SM. 

          Simonton was also ranked #1 in quality in the 2009, 2007, 2002 and 1998 Brand Use Studies sponsored by Builder magazine and has won three Best In Class Awards currently administered by LBM Journal Research Institute. 

             Founded in 1946, Simonton’s hallmark has been to deliver the industry’s shortest, most dependable lead-times. Part of the home and security business of Fortune Brands, Inc. (NYSE: FO), Simonton delivers award-recognized products nationwide to key markets throughout the 48 continental United States. Simonton is a founding

 

 ENERGY STAR is a government program that helps consumers protect the environment through superior energy efficiency and is a registered trademark of the U.S. Department of Energy and the U.S. Environmental Protection Agency. 

This blog post was approved by www.iGreenBuild.com.

Sustainable Cypress Building Products - Architect Case Studies

PITTSBURGH, March 21, 2011 –The Southern Cypress Manufacturers Association (SCMA) has published two new case studies that highlight the natural beauty, durability, and versatility of cypress.    

Cypress Endures the Elements at Wyoming’s Jackson Hole Airport

Flying into the recently expanded Jackson Hole Airport, Jackson, Wyo., is a breathtaking experience. It’s the only commercial airport located within a U.S. national park, Grand Teton National Park, and its panoramic views of the Teton mountain range to the east and the Gros Ventre range to the west are awe-inspiring. That beauty, combined with the innovative use of cypress in its recent renovations, makes the airport a traveler’s delight. But the successful make-over was not without significant challenges.

Cypress Complements Outdoor Living on Shelter Island

When Manhattan architect Cary Tamarkin, of Tamarkin Co. Architecture and Development, set out to build his dream beach house on Shelter Island, N.Y., he considered every detail, including the views of the Shelter Island Sound and the melodic swish of the waves. “My goal was to make a simple, yet intricately designed house that took full advantage of the wonderful site.” Tamarkin said. “And of course, I wanted to design the coolest house on Shelter Island.” His effort, enhanced by the site’s cooling breezes and breathtaking sunsets, resulted in a cypress showcase.

The case studies are the newest in a series of stories that examine how and why architects use cypress for their residential and commercial building projects.

The Southern Cypress Manufacturers Association is a non-profit organization dedicated to the promotion of sustainable cypress building products to trade professionals and consumers. For more information, visit www.cypressinfo.org.

This blog post was approved by www.iGreenBuild.com.